Hardware Specifications


  The following specifications apply to the Rimage CD printer.
Physical Propertles
  6" H x 8.5" W x 16" D
  (152.4 mm x 215.9 mm x 406.4 mm)
  22 pounds (9.9 kg)
Prlnt Quality
  300 dpi (11.8 dots per mm)
Print Method
  Thermal transfer line printer
Medla Types
  Standard CD (lacquer or matte finish) and
  CDOM without art screening
Nominal Medla Diameter
  4.72 inches (120 mm)
Effectlve Prlnt Area
  4.6 inches (116.8 mm) Outside Dimension
  1.6 inches (40.64 mm) Inside Dimension
Power  
  100-240 VAC, 50-60 H, 1.0-0.55 A, autoranging
Graphic Filters
  pcx, bmp, tif
Operating	Envlronment
  60° F to 95° F (15.5° C to 35° C) at 45%
  to 80% relative humidity, non-condensing
Ribbon Color 
  Mono or single color
Ribbon Capacity  
  1500 CDs single-pass printing
Printing Speed  
  Approximately 10-20 seconds per CD
  (depending on amount and complexity to be printed)
Printing Direction    
  Images are printed from a top to bottom
  orientation as the media is moving out of the machine.
Printing Quality
  Print strobe and media type parameters
  are used to control print quality.
Ribbon Saver
  When printing less that a full CD or in
  specific locations on the disc, the ribbon
  is automatically separated from the print
  head and does not advance as the print
  head is repositioned on the disc.
System	Requlrements
  PC 486 or greater, 8 MB of RAM, MS
  DOS 6.X and Windows 3.1 or greater
Agency Listings
  Emissions: FCC Class A, EN55022
  Class B
  Susceptibility EN50082-1
  General conformity to CE Mark
  Standards for domestic, commercials,
  and light industrial environments.
Shlpping Prlnter Dlmenslons (tor CDPR11)
Physlcal Propertles
  15" H x11" W x 21" D
  27 pounds
Image Propertles
  The maximum image size the printer is capable of handling.
  Propertles  Maxlmum Image Slze
  Resolution  1/300"
  Width   5.12" (1536 pixels)
  Height   4.72"	(1416 pixels)


return to the Rimage Driver Project Main Page